Displaying The Current Static Vlan Port Egress List; Renaming A Static Vlan - Enterasys SmartSwitch 2200 Series 2E253 User Manual

4. Use the arrow keys to highlight the VLAN Name field.
5. Type a name of up to 32 ASCII characters in the VLAN Name field
and is not required for VLAN operation.
6. Press ENTER.
7. Use the arrow keys to highlight the ADD field near the bottom of the screen.
8. Press ENTER. If the VLAN is successfully created, the screen refreshes and shows the newly
created VLAN. If the VLAN is not created successfully, an error is displayed in the Event
Message Line at the top of the screen.
7.3.2

Displaying the Current Static VLAN Port Egress List

To see the ports associated with a particular VLAN, the Static VLAN Egress Configuration screen
must be displayed. This screen is also used to change the Egress setting for each port of the VLAN.
For more information about the Static VLAN Egress Configuration screen, refer to
To access the Static VLAN Egress Configuration screen, proceed as follows:
1. Use the arrow keys to step to the line with the VLAN of interest.
2. Press ENTER. The Static VLAN Egress Configuration screen displays, showing a list of the
current ports associated with the VLAN selected in
VLAN Egress Configuration screen and how to use it, refer to
7.3.3

Renaming a Static VLAN

To change the name of an existing VLAN, proceed as follows:
1. Use the arrow keys to highlight the VLAN ID field near the bottom of the screen.
2. Type the VLAN ID number of the VLAN to be changed. Press ENTER.
3. Use the arrow keys to highlight the VLAN Name field near the bottom of the screen.
4. Type the new VLAN name of up to 32 ASCII characters in the VLAN Name field.
5. Press ENTER.
6. Use the arrow keys to highlight the ADD field and press ENTER. The new name is now
displayed.
Static VLAN Configuration Screen
step 1. For more information about the Static
Figure
802.1Q VLAN Configuration Menu Screens
.
This is an optional attribute
Section
7-4.
7.4.
7-9