Selecting Local Management Menu Screen Items; Exiting Local Management Screens - Enterasys SmartSwitch 2200 Series 2E253 User Manual

B
Security
3.1.1

Selecting Local Management Menu Screen Items

Select items on a menu screen by performing the following steps:
1. Use the arrow keys to highlight a menu item.
2. Press ENTER. The selected menu item displays on the screen.
3.1.2

Exiting Local Management Screens

There are two ways to exit the Local Management (LM) screens.
Using the Exit Command
To exit LM using the EXIT screen command, proceed as follows:
1. Use the arrow keys to highlight the EXIT command at the bottom of the Local Management
screen.
2. Press ENTER. The Local Management Password screen displays and the session ends.
Using the RETURN Command
To exit LM using the RETURN command, proceed as follows:
1. Use the arrow keys to highlight the RETURN command at the bottom of the Local Management
screen.
2. Press ENTER. The previous screen in the Local Management hierarchy displays.
NOTE: The user can also exit Local Management screens by pressing ESC twice. This
exit method does not warn about unsaved changes and all unsaved changes are lost.
Passwords
Radius Configuration
System Authentication Configuration
EAP Configuration
EAP Statistics Menu
MAC Port Configuration
MAC Supplicant Configuration
Navigating Local Management Screens
Name Services Configuration
EAP Session Statistics
EAP Authenticator Statistics
EAP Diagnostic Statistics
Accessing Local Management 3-3