Enterasys SmartSwitch 2200 Series 2E253 User Manual page 300

Built-in Commands
cdp
Description:
Syntax:
Options:
Examples:
defroute
Description:
Syntax:
Options:
Examples:
11-8 Network Tools Screens
Enables, disables or displays the status of the CDP Discovery Protocol.
cdp [enable/disable/status]
enable — Enables CDP discovery protocol on the device.
disable — Disables CDP discovery prototol on the device.
status — Displays the status of the CDP discovery protocol.
-> cdp status
CDP is Enabled
-> cdp disable
-> cdp status
CDP is Disabled
Displays, sets, or deletes the default IP route to a managed device through the
specified interface.
defroute
defroute [interface number] [IP address]
defroute delete [interface number] [IP address]
interface number — Specifies the default IP route interface number.
IP address — Specifies the default IP route IP address.
-> defroute
# Default route is 147.152.42.32 on interface 2
-> defroute 2 147.152.42.32
# Default route is 147.152.42.32 on interface 2
-> defroute delete
# Default route is not currently set.