Table of Contents
Advertisement
Protocol Port Configuration Screen
7.8.4
Deleting Line Items
All, or one or more, line items can be deleted as follows:
Deleting All Classification Rules
To delete all the Classification Rules in the top half of the screen, use the arrow keys to highlight
the DEL ALL command field and press ENTER.
Deleting One or More Classification Rules
To delete one or more Classification Rules, mark each one and then delete them, as follows:
1. Use the arrow keys to highlight the line with the Classification Rule to be deleted.
2. Press the M key and an asterisk (*) appears next to the highlighted line to mark it. The DEL ALL
command is changed to DEL MARKED.
3. If more than one Classification Rule is to be deleted, repeat
NOTE: If for some reason you want to remove a mark, perform
the M key when a marked line is highlighted will remove the mark. If all marks are
removed, the DEL MARKED command is changed back to DEL ALL
4. After the lines are marked, use the arrow keys to highlight the DEL MARKED command field.
5. Press ENTER. The marked line items are deleted and the DEL MARKED command is changed
back to DEL ALL.
7.9
PROTOCOL PORT CONFIGURATION SCREEN
When to Use
To perform the following:
•
Display the ports.
•
Show which ports are set to the line item containing the VID/Classification (Classification Rule)
of interest in the VLAN Classification Configuration screen described in
•
Add or remove ports from being associated with the Classification Rule.
7-34
802.1Q VLAN Configuration Menu Screens
steps 1
and
2
to mark each line.
and
steps 1
.
Section
2. Pressing
7.8.
Advertisement
Table of Contents
