Enterasys SmartSwitch 2200 Series 2E253 User Manual page 370

Example 6, Locking a MAC Address to a Port Using Classification Rules
2. Assign Port 1 and 2 to the Red VLAN and set the ports to handle untagged frames as follows:
•
The Red VLAN is selected from the Static VLAN Configuration screen to display the Static
VLAN Egress Configuration screen.
•
The following are set using the Static VLAN Egress Configuration screen:
– Port 1, Egress: UNTAGGED
– Port 2, Egress: UNTAGGED
No other ports are assigned to the Red VLAN and the exiting ports are left in the default
setting of NO.
3. Remove all ports from the Default VLAN Egress List as follows:
•
The Default VLAN is selected from the Static VLAN Configuration screen to display the
Static VLAN Egress Configuration screen. The following is set using the Static VLAN
Egress Configuration screen:
SET ALL PORTS: NO
This configuration setting will cause the untagged frames sent to the Default VLAN from Ports
1 and 2 to be dropped because Ports 1 and 2 have been deleted from the Egress list of the Default
VLAN.
4. Create two source (src) MAC address classification rules and apply them to the Red VLAN
(VID 2), the following settings are entered using the VLAN Classification Configuration screen:
For the Red VLAN and Port 1:
•
VID: 2
•
Classification: src MAC Address
•
Subclassification/MAC Address: 00.00.00.00.00.0A
•
ADD the rule. It will display in the top half of the VLAN Classification Configuration screen.
12-38 VLAN Operation and Network Applications