Table of Contents
Advertisement
Spanning Tree Port Configuration Screen
Field Descriptions
Refer to
Table 6-4
for a functional description of each screen field.
Table 6-4 Spanning Tree Port Configuration Screen
Use this field...
Port #
(Read-Only)
MAC Address
(Read-Only)
State (Read-Only)
Status
(Toggle/Read-Only)
Switch Address
(Read-Only)
Age Time
(Read-Only)
STP VLAN ID
(Selectable)
Number of Ports
(Read-Only)
6-10
802.1 Configuration Menu Screens
To...
See the port numbers of each link associated with the STP VLAN ID
selected in the STP VLAN ID field.
See the Mac address of the switch residing of each port.The first MAC
Address is always associated with the VLAN ID selected in the
STP VLAN ID field. The default is the MAC Address of the Default
VLAN.
See the current state of each port; listening, learning, or forwarding.
Enable or disable the physical state of the ports. The Status field
toggles between Enable and Disable using the SPACE bar.
When you step to an STP VLAN ID other than Default, this field
becomes a read-only field that shows the status of the ports associated
with the VLAN shown in the STP VLAN ID field.
See the MAC address of the switch.
See the age time of learned entries.
Select the STP VLAN ID. You can step this field to the STP VLAN
IDs of each existing VLAN by using the SPACE bar. The default
setting is Default, which represents the Default VLAN, 1.
When you highlight the STP VLAN ID field and press ENTER, the
number of ports of the STP VLAN ID and their current status are
displayed.
See the total number ports associated with the VLAN ID selected in the
STP VLAN ID field. This field changes when you highlight the STP
VLAN ID field and press ENTER.
Advertisement
Table of Contents
