Enterasys SmartSwitch 2200 Series 2E253 User Manual page 181

Standalone switches local management
Table of Contents

Advertisement

Table 6-3 Spanning Tree Configuration Screen
Use this field...
Current STP Mode
(Selectable)
Priority
(Selectable)
VLAN
– bottom of screen
(Modifiable)
Operation
(Toggle)
ADD ALL
CONFIGURED
VLAN (Toggle)
To...
Select the current STP mode using the SPACE bar. You can select one
of the following: IEEE, PVSTP, NONE, and DEC. The default setting
is IEEE.
It is recommended that all switches in the network be configured for
the same STP mode setting.
IEEE = 802.1w Spanning Tree protocol – A single spanning tree for
the entire network. Redundant links are placed in standby mode. States
are predetermined to ensure an accelerated failover.
PVSTP = Per VLAN Spanning Tree Protocol – PVSTP is also known
as the Spanning Forest. PVSTP allows each VLAN to have its own
spanning tree, which allows multiple links to be active, each assigned
to a different VLAN.
NONE = Spanning tree is not enabled.
DEC = DEC spanning tree protocol.
Select the VLAN's 802.1D bridge priority using the SPACE bar. Valid
values are in multiples of 4096, with 0 indicating high priority. Default
value is 32768. The VLAN with the highest priority becomes the
Spanning Tree root.
Enter the number of the VLAN to be added or deleted from the VLAN
list.
The default value is 2.
Add or Delete the VLAN entered in the VLAN field. This field is
toggled using the SPACE bar.
The default value is Add.
Implement the new configuration to all static VLANs and update the
VLAN list to include the new static VLANs.
Spanning Tree Configuration Screen
802.1 Configuration Menu Screens
6-7

Advertisement

Table of Contents
loading

Table of Contents