Enterasys SmartSwitch 2200 Series 2E253 User Manual page 162

Link Aggregation Menu Screen (802.3ad Main Menu Screen)
Table 5-9 802.3ad Port Details Screen Field Descriptions (Continued)
Use this field...
ActorOperState
(Read-Only) (Continued)
PartnerAdminKey
(Modifiable)
PartnerAdminState (hex)
(Modifiable)
PartnerOperKey
(Read-Only)
PartnerOperState
(Read-Only)
SelectedAggID
(Read-Only)
AttachedAggID
(Read-Only)
5-34 Port Configuration Menu Screens
To...
bit 5 Distributing, 1 indicates that we are Distributing.
"Distributing" means that a port is ready to transmit
traffic. If Distributing is true a 'D' is displayed,
otherwise a '-' is displayed in this bit position.
bit 6 Defaulted, 1 indicates that we have deFaulted.
If no protocol partner is available a port will resort to
using default information about its partner. When this
happens a port is said to be defaulted. If this bit is 1 an
'F' is displayed, otherwise a '-' is displayed in this bit
position.
bit 7 Expired, 1 indicates that we have Expired.
This indicates that no LACP PDUs have been received
for a sufficient length of time so the partner
information has expired. If this is true, an 'E' is
displayed, otherwise a '-' is displayed in this bit
position.
Set a default value to use for PartnerOperKey when no
protocol partner is available.
Set a default value to use for PartnerOperState when no
protocol partner is available.
See a default value to use for PartnerOperState when no
protocol partner is available.
See current state value of the partner port (same bits as the
ActorOperState).
See the instance of the aggregator that this port has selected.
See the instance of the aggregator to which this port is
attached.