Chapter 8. How To Use The Copy Function; Making Single And Multiple Copies; Making A Single Copy - Brother INTELLIFAX IntelliFAX 3550 Owner's Manual

3550-US-5.0 3550-US-5.0 3550-US-5.0
3550-US-5.0 3550-US-5.0
HOW TO USE THE COPY FUNCTION
8. HOW TO USE THE COPY FUNCTION 8. HOW TO USE THE COPY FUNCTION 8. HOW TO USE THE COPY FUNCTION 8. HOW TO USE THE COPY FUNCTION 8. HOW TO USE THE COPY FUNCTION

Making Single and Multiple Copies

Use this function to make a single copy or multiple copies. When making copies, make sure the
text or image on the original document is not too close to the edge. Your fax machine can not read
anything closer than 1/8 inch (4 mm) from the edge of the paper. Original documents should be
straight and not wrinkled or they may jam. Also, do not pull on the paper while copying is in
propress. This may distort the image and damage your machine.
Set the resolution to either PHOTO, FINE or S.FINE. If you select STANDARD, the resolution
will change automatically to S.FINE. However, when you make a single copy and select S.FINE,
the resolution may change automatically to FINE in case memory is used for memory transmission.
Make sure there is enough recording paper in the machine. And when making multiple copies,
do not let the receiving tray become overstacked. Remove copied paper from the receiving tray
frequently.
NOTE: If you purchase the optional 1 or 2 MB of memory for your machine, the copy function will
include an additional step allowing you to sort multiple copies.

Making a Single Copy

Use this function to make a single copy.
KEYS TO PRESS KEYS TO PRESS
KEYS TO PRESS KEYS TO PRESS KEYS TO PRESS
1 . Insert the documents face down
into the feeder.
2 . Press Copy.
3 . Press Copy or just wait for 5
seconds.
8 - 1
THE DISPLAY WILL SHOW: THE DISPLAY WILL SHOW:
THE DISPLAY WILL SHOW: THE DISPLAY WILL SHOW: THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
FAX: NO. & START
COPY: PRESS COPY
N O . O F C O P I E S : 0 1
ENTER & COPY
C O P Y I N G
COPYING P.01
COPYING P.02
KEY