Input paper guide
1
2
3
Note
You can use needle-nose pliers or your fingers to unplug the ground wire.
Figure 154.
Input paper guide (1 of 2)
4
Figure 155.
Input paper guide (2 of 2)
5
ENWW
Remove the 8-bin mailbox from the printer.
Remove the face-up bin and the blind cover. See page 167.
On the left side of the 8-bin mailbox, hold down the jam access handle (callout 1) while
unplugging the ground wire (callout 2) that connects the input paper guide to the flipper
motor.
1
Use a flatblade screwdriver to release two retaining tabs (callout 2).
While holding down the jam-access handle, remove the input paper guide while carefully
routing the ground wire that connects to the end of the input paper guide.
2
3
Chapter 6 Removal and replacement 177