Paper-path assembly
1
2
3
Figure 105.
Paper-path assembly
4
5
138 Removal and replacement
Remove the following FRUs:
• Face-up bin. See page 129.
• Stapler/stacker bin. See page 129.
• Back inner cover. See page 130.
• Front inner cover. See page 130.
• Front cover. See page 131.
• Back cover. See page 132.
Unplug the paper-path ribbon cable (callout 1) by pressing the black tabs on the cable
connector.
Use a Torx #20 screwdriver to remove two mount screws (one shown, callout 2).
Grasp each side of the assembly, and lift it up to clear the tabs.
Remove the paper-path assembly.
1
2
2
2
ENWW