Metal tape and housing assembly
1
WARNING!
The metal tape has sharp edges.
2
Note
Let the tape slowly rewind into its housing.
3
Figure 159.
Metal tape and housing assembly (1 of 2)
ENWW
Remove the following FRUs:
• Output bin. See page 167.
• Blind cover. See page 167.
• Paper bins. See page 167.
Hold the metal tape toward the end and use a flatblade screwdriver to push and release the
retainer tab (callout 1) that secures the end of the tape.
Remove one screw (callout 2).
1
2
Chapter 6 Removal and replacement 181