Booklet bin
1
Hint
To make parts-removal easier, remove the booklet bin-full sensor flag. See page 106.
2
3
Figure 69.
Booklet bin (1 of 4)
4
Figure 70.
Booklet bin (2 of 4)
ENWW
Remove the following FRUs:
• Front cover. See page 101.
• Paper-guide wire. See page 102.
Face the right side of the multifunction finisher, and open the jam-removal cover.
Remove two self-tapping screws (callout 1). Gain access to the screws through the access
holes (callout 2).
1
2
Face the left side of the multifunction finisher, and remove two screws (callout 3).
2 3
2
2
Chapter 6 Removal and replacement 111