4
Figure 125.
Optical sensors (2 of 3)
5
6
Note
The sensor is secured with an adhesive strip. You must apply pressure to dislodge the sensor.
Figure 126.
Optical sensors (3 of 3)
ENWW
Remove two plastic ribs (callout 2).
Disconnect the cable from the optical sensor (callout 3).
Press the optical-sensor-lock tab (callout 4) until it clears the output-device frame. Pull the
sensor out and away from the output device.
4
2
2 2
3
2
Chapter 6 Removal and replacement 157