Advertisement
TECHNICAL GUIDE
STEP ONE
With the handle facing you, remove the right side
screw and end cap from the cartridge. Be careful of
the drum cover spring! Remove it with the end cap.
STEP TWO
With the pair of needle-nose pliers, release both the
hopper tension springs.
STEP THREE
Slide the waste/drum section over to the left side.
Separate the two halves.
STEP FOUR
On the waste/drum section, lift the drum up from the gear
side. Twist and remove from the hopper.
©2015 Recycler Publishing & Events Ltd
By Mike Josiah and the Technical Staff at Uninet
THE RECYCLER - TECHNICAL GUIDE
PAGE 3
Advertisement
