8-bin mailbox assemblies
Power supply
1
2
3
4
5
Note
Hold each tab while releasing the opposite tab.
Figure 141.
Power supply
To reinstall
1
ENWW
Remove the 8-bin mailbox from the printer.
Disconnect the power cable from the PCA. See figure 133.
Remove the cable channel. See page 166.
Disconnect the power cable at the top of the power supply.
Remove the power supply by pressing the plastic retaining tabs (callout 1) that are on each
side of the power supply.
Make sure that the power cable and the Jet-Link cable are aligned in the correct slots of the
back cable cover.
1
Chapter 6 Removal and replacement 169