4
Figure 160.
Metal tape and housing assembly (2 of 2)
5
6
To reinstall
1
2
182 Removal and replacement
Using a flatblade screwdriver, release two plastic retaining tabs (callout 3).
Gently pull the delivery head assembly toward you to remove the end of the tape from
behind the rollers that hold the tape in its track.
Pull the tape housing toward you to remove it.
Make sure that you reinstall the ESD brush correctly into its hook and pin before reinstalling
the screw.
Make sure that the delivery head assembly is in the "up" position.
3
ENWW