Table 20. Skew specifications—multifunction finisher
Skew type
Folding
Stapling
ENWW
Specification
X = +/- 2.5 mm (0.10 inch),
specified at center
Y = +/- 2.5 mm (0.10 inch),
length
NOTE:
The measurement is affected by expansion or shrinkage of the sheet as a
result of fusing. The amount of expansion or shrinkage depends on the type of
media. Some media can expand or shrink by 2 mm (0.08 inch).
X = +/- 1.0 mm (0.04 inch)
NOTE:
Take this measurement on the inside sheet of an open booklet.
Diagram
X
Stapling line
Folding line
Y
Feeding
direction
X
3 Operation 49