Internal-Path Cover (Dispose Subcover); Figure 58. Internal-Path Cover (1 Of 2); Figure 59. Internal-Path Cover (2 Of 2) - HP Color LaserJet 9500 Service Manual

Internal-path cover (dispose subcover)

1
2
3
Figure 58. Internal-path cover (1 of 2)
CAUTION Be careful when lifting the cover (callout 4) to avoid damaging the cable.
4
5
Figure 59. Internal-path cover (2 of 2)
100 Removal and replacement
Remove the following covers:
• Front cover. See page 95.
• Back cover. See page 98.
• Upper panel assembly. See page 99.
Remove one screw (callout 1).
Unplug the cable connector (callout 2), and then remove the cable from the cable-retainer
clip (callout 3).
2 2
Gently lift the cover upward and disconnect the other end of the cable (callout 5).
Continue lifting the cover upward to remove it.
2 4
1 2
3 2
2 5
ENWW