Safety-switch assembly (stapler/stacker only)
1
2
3
4
Figure 123.
Safety-switch assembly
ENWW
Press the two tabs on the sides of the safety-switch assembly cover (callout 1) to release it
from the frame.
Lift the cover away from the safety-switch assembly.
Disconnect two cables (callout 2) from the safety-switch assembly.
Press the tabs on the bottom of the safety-switch assembly, and lift the safety-switch
assembly away from the 3,000-sheet stapler/stacker.
1
2
2
2
Chapter 6 Removal and replacement 155