Aligner racks
1
1
2
Aligner racks
Reinstall note
The two aligner racks are not interchangeable.
ENWW
Face the left side of the multifunction finisher.
Locate the snap tabs (callout 1) on the outside of each aligner rack.
Pinch each set of snap tabs with needle-nose pliers to release the aligner racks.
2 1
Reinstall the front aligner rack (marked with the letter F) on the side that is closer to the front
of the multifunction finisher.
Reinstall the rear aligner rack (marked with the letter R) on the side that is closer to the back
of the multifunction finisher.
Chapter 6 Removal and replacement 105