Tsi/Csi; Sender Id - Oki OF5700 Service Manual

01

TSI/CSI

02

Sender ID

03 Personal Box
04 Mem. Password
Register a TSI/CSI (local telephone number).
1) Number of characters used to register a TSI/CSI 20 characters (ten-keys
0-9/HYPHEN (+)/SPACE/+) * The setting data must be transferred to the G4
board.
Register a sender ID.
1) Number of characters used to register a sender ID 32 characters
Ten-keys 0-9/*/#/alphabetic characters (uppercase and lowercase
characters)/special characters/PAUSE/HYPHEN/SPACE/+
* The setting data must be transferred to the G4 board.
Open/close a personal box (confidential and bulletin). When the specified box
has not been opened: "CONFIDENTIAL" or "BULLETIN POLLING" can be
selected. When the specified box is opened as a confidential box,
"CONFIDENTIAL" or "CLOSE" can be selected.
When the specified box is opened as a bulletin, "BULLETIN POLLING" or
"CLOSE" can be selected.
1) Number of personal boxes
OKIFAX 5700/5900: 16 boxes (1-16)
* The user can set these 16 boxes as confidential and bulletin boxes as
desired.
2) Confidential
A box used only for confidential reception. Either sub frame or Oki mode (NSF)
can be selected. When a confidential box is opened, a password must be
registered so that other persons cannot print data. Password: 4 digits (0-9
only)
3) Bulletin Poll
A box used for bulletin transmission. It is opened to multiple persons.
(Password setting is not required.) An SEP frame can be used for bulletin
transmission. A document is assigned to a box so that data can be obtained
from this box.
* SEP and SUB frames are used for bulletin transmission and confidential
reception respectively.
* To assure communication with the existing machines, this machine is
designed taking into account the existing polling (S bit) and confidential
(NSS) methods.
Set the password for using the Auto Answer Mode (MEM.: Memory only
reception mode). Persons who do not know the password cannot make
changes or print memory data in the Auto Answer Mode (MEM. mode).
* This setting is disabled when Auto Answer Mode is set to MEM.
1) Number of Mem. passwords that can be registered OKIFAX 5700/5900: 1
2) Number of characters used to specify a Mem. password: 4 characters
(digits only)
3) Password check
The entered password cannot be checked on the machine. However, it can be
checked using RMCS.