Oki OF5700 Software Manual

Kit Contents

• These instructions
• Software License Agreement
• Bi-Directional Cable
• JetSuite Pro software CD
• JetSuite Pro User's Guide

System Configuration

Instructions

1 Connect the bidirectional cable to the parallel port on the back of the fax
2 Connect the other end of the cable to the PC.
3 Install the JetSuite software following the instructions in the JetSuite Pro
!
© 1999 Oki Data Americas, Inc.
OKIFAX
PC Interface Kit Instructions
Required
90 MHz Pentium PC
16 MB memory: 32 MB memory
for Windows 98 or NT 4.0
8 MB of permanent swap file space
(Windows 3.1x)
20 MB of disk space
256 color video driver
Bidirectional parallel printer port
Operating Systems:
Windows 3.1x
Windows for Workgroups 3.11
Windows 95
Windows 98
Windows NT 4.0 (Service Pack 3)
unit.
User's Guide.
If you have any other version of JetSuite software installed, uninstall it
using the JetSuite Uninstall utility before installing the software in
this kit.
Two Com ports must be available for this installation: the defaults are
Com 7 and Com 8.
It is very important that your video driver be configured for at least 256
colors. Failure to do so can cause various problems with printed
output.
Make sure that the parallel port being used for the fax by the computer
is configured for bidirectional communication.
Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
® 5700 & 5900
Recommended
200 MHz Pentium PC
32 MB or more of memory
16 MB of permanent swap file
space (Windows 3.1x)
50 MB of disk space
256 or more color video driver
Bidirectional parallel printer port
Operating Systems:
Windows 95
Windows 98
FAX: (856) 222-5320 http://www.okidata.com
58338201