51
Flash/Earth/Normal
52
Dial Prefix
Note
: Setting values are defined for each country code.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Set the method of switching between flash and earth modes for PBX line.
1) Setting values
NORMAL/FLASH/EARTH selectable (PBX line origination types)
* Selection is skipped over when the ISDN board is mounted.
(selection allowed if SERVICE BIT=ON)
Set the access digits used for connecting the PBX line to the public line.
1) Setting values
OFF/1- to 4-digit access digit (digits only)
* Access digits are validated when a numeric value is entered.
* All spaces: OFF
* Selection is skipped over when the ISDN board is mounted.
(selection allowed if SERVICE BIT=ON)