Routine Inspection - Oki OF5700 Service Manual

6.2 Routine Inspection

Basically, the routine inspection of following items is performed about half-yearly (or every one year) after the
machine is installed. The description of routine inspection is shown in Table 6.2.
No. Part Name
1 Roller-scan
2 Roller-ADF
3 Contact Image
Sensor
4 Separation
Rubber
5 LED printhead
6 Printer unit
7 Lubrication
8 Cleaning
Service Guide OKIFAX 5700/5900
Chapter 6 Cleaning and Maintenance
Table 6.2 Routine Inspection
Expected Use Before Replacement
Clean with wet cloth.
Clean with wet cloth. If the surface of this roller
becomes dirty and the dirt causes misfeeding of
documents, perform this cleaning.
Check for accumulation of paper dust, etc. Clean with
ethyl alcohol if necessary.
Clean with wet cloth. If this rubber is worn out, replace
this rubber, every one year.
Clean the surface of the head by moving the tissue
paper back and forth several times.
Clean the inside of the printer unit by using wet cloth.
Apply MOLYKOTE EM-30L Grease (Made by Dow
Corning Co., Ltd.), oil to the gears every one year.
Remove materials that have fallen from outside if any.
Figure 6.2 Parts of Routine Inspection
Page: 200
Reference Item No. in
Figure 6.2
(1)
(2)
(3)
(4)
(5)