Stepping Motor (Hopping) - Oki OF5700 Service Manual

Page: 329
Service Guide OKIFAX 5700/5900
Chapter D Second Paper Feeder

3.3.1 Stepping motor (Hopping)

(1) Turn the facsimile power switch off, pull out the AC cord from the outlet. Remove the facsimile off Second Paper
Feeder.
(2) Take the paper cassette assy (1) out of Second Paper Feeder.
(3) Remove six screws (2) and remove the upper plate (3). Remove two screws (5) and remove the hopping frame
assy (6).
(4) Remove the front cover assy (4) off the guide boss on the guide L (2nd) assy (7) by bending the guide L (2nd)
assy (7) in the direction of arrow shown in the magnified view below.
(5) Pull the sheet guide assy (8) in the direction of arrow a and also push in the direction of arrow b to unlock the
notch, and bring the sheet guide assy (8) in the direction of arrow c to remove the sheet guide assy (8).