84
Subnet Mask
85
Default Gateway
Note: Setting values are defined for each default type
The settings listed below can be made only when a LAN option is installed. When it is not installed, none of
LAN-related setup items can be selected. None of them can be selected during NIC initialization.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Display the subnet address from the NIC, check the data from the terminal,
and change the setting.
1) Setting values
32 bits are divided into four 8-bit decimal values for setting.
The decimal values are separated by dots as shown below.
[207.255.255.0 ]
* If a LAN option is installed, this setting cannot be made when an HSP
error has occurred.
* This setting cannot be made when not supported by NIC card.
Display the gateway address from the NIC, check the data from the
terminal, and change the setting (NIC option setting).
1) Setting values
32 bits are divided into four 8-bit decimal values for setting.
The decimal values are separated by dots as shown below.
[206.181.233.2 ]
* If a LAN option is installed, this setting cannot be made when an HSP
error has occurred.
* This setting cannot be made when not supported by NIC card.