Location Program (2/2) - Oki OF5700 Service Manual

2.9.4.1 Location Program (2/2)

No. Item
3 Batch TX time
4 Forwarding No.
5 Forward ON P-ERR.
6 Relay report No.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIFAX 5700/5900
Specifications
Set a batch transmission time (24-hour system). When a time is specified,
locations can be specified during batch transmission operation.
1) Number of batch TX times that can be registered OKIFAX 5700/5900: 10
(Speed dial numbers 31-40 are assigned.)
* Registration is enabled if the specified speed dial is not registered in the
remote machine.
2) Specifiable time range
00:00 to 23:59 (Date cannot be specified.)
Specify the destination of forwarding for incoming call. When the transfer
destination telephone number is set, FWD can be specified in the AUTO
ANSWER mode.
1) Number of forwarding destination that can be specified
OKIFAX 5700/5900: 1
* The HYPHEN key is prohibited when country code
is set to FRE.
2) Number of characters used to specify a destination 40 characters (ten-keys
0-9/*/#/PAUSE/HYPHEN/SPACE/+)
Specify the destination of forwarding for no toner/no paper reception.
When the transfer destination telephone number is set, Forwarding can be
transmitted to the specified destination at the time of message in memory for
no toner/no paper condition.
1) Number of forwarding destination that can be specified OKIFAX 5700/5900:
1
2) Number of characters used to specify a destination 40 characters (ten-keys
0-9/*/#/PAUSE/HYPHEN/SPACE/+)
* The HYPHEN key is prohibited when country code is set to FRE.
Specify the destination of a relay report for relay broadcast initiate
transmission.
When this destination is specified, a relay report is transmitted to the specified
destination upon the relay broadcast initiate transmission.
1) Number of characters used to specify a destination 40 characters (ten-keys
0-9/*/#/PAUSE/HYPHEN/SPACE/+)
* The HYPHEN key is prohibited when country code is set to FRE.
Chapter 2 Installation
Page: 118