Location Program (1/2) - Oki OF5700 Service Manual

2.9.4.1 Location Program (1/2)

No. Item
1 Speed Dial
2 Group
Service Guide OKIFAX 5700/5900
Specifications
Register speed dial number.
(LOC#/NAME/ALT#/Communication parameters)
* Only LOC# may be registered.
(If NAME is omitted, location search will not be made.)
1) Number of speed dials
OKIFAX 5700: 1-140 (1-40 are assigned to ONE TOUCH keys.)
OKIFAX 5900: 1-230 (1-80 are assigned to ONE TOUCH keys.)
2) Number of characters that can be entered (all speed dials)
NAME = 15 characters (ten-keys 0-9/*/#/alphabetic characters (uppercase and
lowercase characters)/special characters/PAUSE/HYPHEN/SPACE/+)
LOC# and ALT# = 40 characters each (ten-keys 0-9/
* /#/PAUSE/HYPHEN/SPACE/+)
* ALT# can register only One touch key.
* The HYPHEN key is prohibited when country code is set to FRE.
3) Communication parameter
- Communication speeds (33.6/28.8/14.4/9.6/4.8k bps)
- Echo protection (ON/OFF)
The settings shown below depend on the ON/OFF setting.
When OT is transmitted, the "Tone for Echo" setting is ignored and the
settings made here are used for the transmission.
- G3/G4 SELECT (G3 mode/G4 mode)
- Switching between G3 mode and G4 mode
Register group dials.
(Only the speed dials to which a location address is assigned can be
registered.)
1) Number of group dials that can be registered
OKIFAX 5700: 20 groups (1 group: 1-140 locations)
OKIFAX 5900: 20 groups (1 group: 1-230 locations)
2) Number of group dial IDs that can be registered 15 characters (ten-keys
0-9/*/#/alphabetic characters (uppercase and lowercase characters)/special
characters/PAUSE/HYPHEN/SPACE/+)
Chapter 2 Installation
Page: 117