4.3.22 Toner Lockout Board
Drum/Resist Motor
1.
Remove two springs, pull the shield
toward you, and remove the LED
head cover.
Caution: Do not lose the springs.
2.
Remove the TLK cover by releasing
hooks (four).
Caution: Pay attention to two
springs.
3.
Remove the board by releasing
hooks (two).
Caution: Do not break the hooks. Be
careful not to lose the springs.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIFAX 5700/5900
Chapter 4 Disassembly
Page: 188