Cng Count - Oki OF5700 Service Manual

62 T/F Timer
Programming
63 Continuous Tone
64 PC/FAX Switch
65

CNG Count

66 Ring Response
Set the time till start of automatic reception when the operator has performed
no operation for the call terminated in the TEL/FAX mode.
1) Setting values
20SEC/35SEC selectable
* Selection is skipped over when the ISDN board is mounted.
(selection allowed if SERVICE BIT=ON)
Set up the reception completion buzzer.
The buzzer sound can be stopped by pressing the STOP key.
1) Setting values
ON: Sounded
OFF: Not sounded
Determine whether the FAX reception mode is to be selected automatically
when PC reception is impossible.
1) Setting values
ON: Selects the FAX reception mode.
Fax transfers received faxes directly to PC.
OFF: Does not select the FAX reception mode (reception disabled).
Fax receives and prints the message.
When T/F, TAD, or Parallel pickup is operating in CNG signal detection
processing, this setting can be shifted to the facsimile reception mode at the
time of number of CNG signal detection times are equal to the set values.
1) Setting values:
1 -5 (in one-tray steps)
* Selection is skipped over when the ISDN board is mounted.
(selection allowed if SERVICE BIT=ON)
Sets the time from arrival of a ring to line seizure
1) Setting values
1 ring/5 sec/10 sec/15 sec/20 sec selectable
* Selection is skipped over when the ISDN board is mounted.
(selection allowed if SERVICE BIT=ON)