4.3.27 Resist Roller, Hopping Roller, Sensor Plates
(1) Disassembly procedure
1) Resist Roller, Hopping Roller
1.
First, carry out the disassembly procedure
up to the point of the Lower Base removal.
2.
Remove the One-way Clutch Gear.
3.
Press the Resist Roller to the right side and
lift up the left side of it, then take off the
Resist Roller.
4.
Remove the One-way Clutch Gear and
Bearing.
5.
Remove the Hopping Roller by sliding to the
right side.
2) Sensor Plates (Inlet, Outlet), Toner Sensor
Service Guide OKIFAX 5700/5900
Chapter 4 Disassembly
Page: 193