On-Line Tests - Oki OF5700 Service Manual

2.9.10 On-line Tests

1. Transmission
(1) Load documents
(2) Make sure that
l
The loaded documents are fed in automatically.
l
The STD and NORMAL lamps light.
l
The display shows SELECT LOCATION(S) OR PRESS COPY.
(3) Dial the telephone number of the remote machine by the ten-key pad.
(4) Make sure that the telephone number of the remote machine is shown on the display.
(5) Press the START/COPY button.
(6) Typical message transmission flow is described in Figure 2.9.10.1.
2. Reception
(1) Use another machine for dialing.
(2) Make sure that
l
The display shows AUTO REC. START.
l
The message is automatically received.
(3) Typical message reception flow is described in Figure 2.9.10.2
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIFAX 5700/5900
Chapter 2 Installation
Page: 148