2.10.4 G4 Board Installation Instruction
1.
Remove Cover-Rear, Plate-Rear
and 2 piece of Plate-dummy.
Caution: Remove only lower
Plate-dummy.
2.
Connect Network card with
Adapter board, then, mount it into
the room. Before installation,
check #1 of Dipswitch should be
"ON" and #2 - $4 be "OFF". In
case of G4 board application,
exchange above Adapter board
to G4 board.
Service Guide OKIFAX 5700/5900
Chapter 2 Installation
Page: 155