67
Distinctive Ring
Note:
Setting values are defined for each default type
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
OKIFAX 5700/5900 Determine whether a distinctive is to be remembered and
detected.
Only in GER, SUI, and AUT modes, OFF is set as the default.
When ON is selected, reception operation starts only when a remembered ring
pattern is detected. If it has not been remembered, a ring pattern defined for
each country as the default is used to detect it.
1) Setting values
ON: Detected
OFF: Not detected
SET: Remembered
* Selection is skipped over when the ISDN board is mounted.
(selection allowed if SERVICE BIT=ON)
* When changing the country code, this setting is forcibly set to OFF.
* In case of applicable countries of DRC remembered ring pattern (Country
code=USA, AUS, NZL, SIN, and HUG), OFF/ON/SET can be selected as
default.
Except for above country, OFF/SET can be selected as default.