Auto Answer Mode - Oki OF5700 Service Manual

10

Auto answer mode

11 Monitor volume
12 Buzzer volume
13 User language
Set up the auto answer mode (FAX/TEL/T/F/TAD/MEM/PC/FWD)
The following restrictions are placed on individual mode settings according to
the machine status and setting:
1) T/F (TEL/FAX AUTO SW.) mode
This mode can be selected only when TEL/FAX Switch is set to ON.
* This mode is automatically switched to the FAX mode when TEL/FAX switch
is set to OFF.
2) TAD (TAD/FAX AUTO SW.) mode (auto answer mode)
This mode can be selected except when TAD is set to OFF (TYPE1-3).
* This mode is automatically switched to the FAX mode when TAD MODE is
set to OFF.
3) MEM. (MEMORY RX) mode
When a memory password was set, this mode cannot be switched to another
mode without entering the set password.
* When printing memory data without returning to the standby state (the flash
memory is has not been written with data in the new mode) after switching
between modes under the above condition, the password need not been
entered again.
4) PC mode (PCFAX mode)
This mode can be selected only when MFPUNLOCK (hidden setting) is set to
ON (default).
5) FWD (FORWARDING) mode (redirecting mode)
This mode can be selected when FORWARDING No. has been programmed.
* This mode is automatically switched to the FAX mode when FORWARDING
No. is erased.
* When G4 is selected, neither T/F nor TAD cannot be selected.
Set the monitor volume.
1) Setting values
OFF/LOW/MID./HIGH-MID./HIGH selectable
Set the buzzer volume (communication end or off-hook alarm).
1) Setting values
LOW/MIDDLE/HIGH selectable.
* The key touch sound level is fixed at LOW.
Select the language used for LCD display or report printing.
1) Setting values
English/Other
Other (second language): GER (German), FRE (French), etc.
* English/Other is selected according to country code.