4.3.10 Printer Unit
1.
Disconnect three flat cables and two
connector cables.
2.
Remove the shield by unscrewing
one screw.
3.
Remove the printer unit by
unscrewing six screws.
Caution:
The number of pins of the
CN2 connector is the same as that
of the CN3 connector; however,
colors of these connectors are
different (CN2 is yellow and CN3 is
white). When connecting these
connectors, pay attention to their
colors.
Service Guide OKIFAX 5700/5900
Chapter 4 Disassembly
Page: 175