1
Sliding hinge mount
2
Hinge pin
3
Hinge assembly
b. Align the sliding hinge mount with the hinge pin on the hinge assembly on the chassis.
c. Press the sliding hinge mount against the hinge pin until the sliding hinge mount snaps onto the
hinge pin.
4. Close the bezel.
Note: When you lock the server side cover, it locks both the cover and the bezel.
Installing the air baffle
To replace the air baffle, complete the following steps:
1. Align the air baffle pins with the holes on the fan cage and the pin hole on the rear of the chassis.
.
Chapter 7
Installing and replacing FRUs
251