Chapter 7. Installing And Replacing Frus; Major Components Of The Server - Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual

Chapter 7. Installing and replacing FRUs

Important: Before you install optional hardware, make sure that the server is working correctly. Start the
server, and make sure that the operating system starts, if an operating system is installed.
This chapter provides detailed instructions for installing optional hardware devices in the server.

Major components of the server

The following illustration shows the major components in the server (depending on the server model). The
illustrations in this document might differ slightly from your hardware.
1
Bezel
2
Optical drive bay EMC shield
3
2.5-inch EMC shield
4
3.5-inch EMC shield
5
2.5-inch hot-swap
6
3.5-inch hot-swap
7
3.5-inch simple-swap drive
8
SAS/SATA 2.5-inch backplane
9
SAS/SATA 3.5-inch backplane
10
Simple-swap 3.5-inch backplane
11
Fan assembly
12
Hot-swap fan
© Copyright Lenovo 2009, 2010
15
ServeRAID MR10is
16
Cover
17
Rear adapter retention bracket
18
Air baffle
19
Heat sink
20
Microprocessor
21
Heat sink retention bracket
22
DIMMs
23
System board
24
VRM
25
Power supply
26
Control panel assembly
143