Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 251

1
Adapter connector
2
Signal cable
Step 17. Reinstall the front fan cage assembly. Align the front fan cage assembly over the fan cage
assembly slot and with the connector on the system board. Lower the fan cage assembly into
the chassis and press down firmly until the fan cage assembly is seated firmly in place. Make
sure that no cables will be pinched.
Step 18. Reinstall the air baffle (see "Installing the air baffle" on page 251).
Step 19. Rotate the rear adapter-retention bracket to the closed (locked) position.
Step 20. Rotate the power-supply cage assembly back into the server. Press the power-supply cage release
tab and rotate the power-supply cage assembly into the chassis.
.
Chapter 7 Installing and replacing FRUs
243