13
ServeRAID MR10i
14
ServeRAID BR10i
Opening the bezel
To open the bezel, complete the following steps:
Note: The illustrations in this document might differ slightly from your hardware.
1. Read the safety information (See Chapter 2 "Safety information" on page 3).
2. Unlock the side cover.
Note: You must unlock the side cover to open or remove the bezel. When you lock the server side cover,
it locks both the cover and the bezel.
3. Remove the bezel. Position your finger on the depressed area on the left side of the bezel and rotate the
bezel away from the server.
4. If you want to remove the bezel completely, press the retention tabs on the hinge assembly toward each
other and pull the hinge assembly out of the chassis.
Note: While pressing the retention tabs together, you might need a screwdriver to help pry the hinge out.
144
ThinkServer TD200 Hardware Maintenance Manual
27
USB cable assembly
28
DVD drive