Chapter 6. Locating Server Controls And Connectors; Front View - Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual

Chapter 6. Locating Server Controls and connectors

This section describes the controls, light-emitting diodes (LEDs), and connectors on the front and rear of
the server, and how to turn the server on and off. For the location of the LEDs on the system board, see
"System-board LEDs" on page 139s.
Note: The illustrations in this document might differ slightly from your model.

Front view

The following illustrations show the controls, LEDs, and connectors on the front of the server models.
The following is an illustration of the 3.5-inch SAS/SATA hot-swap hard disk drive model:
1
Power-on LED
2
Power-control button
3
Hard disk drive activity LED
4
System error LED
5
USB 2
6
USB 1
The following is an illustration of the 2.5-inch SAS/SATA hot-swap hard disk drive model:
© Copyright Lenovo 2009, 2010
7
DVD-eject button
8
Hard disk drive activity LED (green)
9
Hard disk drive status LED (amber)
10
DVD drive activity LED (green)
11
Front information panel
131