Step 4.
Rotate the drive tray handle of the drive assembly to the open position.
Step 5.
Grasp the handle of the drive and pull the drive out of the bay.
1
Hot-swap hard disk drive
2
Drive tray
3
Drive tray handle (in open position)
Step 6.
If you are instructed to return the 3.5-inch hot-swap hard disk drive, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.
Installing a 3.5-inch hot-swap hard disk drive
Before installing a 3.5–inch hot-swap hard disk drive, read the following information:
• The 3.5–inch hot-swap drives must be either all SAS hard disk drives or all SATA hard disk drives; do
not mix SAS and SATA drives.
.
Chapter 7
Installing and replacing FRUs
177