Removing The Air Baffle; Installing The Air Baffle - Lenovo ThinkServer RS110 Type 6435 Hardware Maintenance Manual

Removing the air baffle

To remove the air baffle, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and all peripheral devices, and disconnect the power cords
3. Remove the server from the rack and remove the cover (see "Removing the
4. Grasp the air baffle by the leftmost and rightmost rear corners and lift it up out

Installing the air baffle

To install the air baffle, complete the following steps.
1. Align the air baffle as shown in the illustration.
2. Press the air baffle into position until it clicks into place.
3. Install the cover (see "Installing the cover" on page 61).
78
ThinkServer RS110 Types 6435, 6436, 6437 and 6438: Hardware Maintenance Manual
on page 57.
and all external cables.
cover" on page 60).
of the server.
Air baffle
Air baffle