Canon G3 Error Code List page 75

##105 [ RX ] Data error occurs in 40 lines or more
Cause
• The line condition is poor, and the image
signal cannot be received correctly.
##106 [ RX ] The procedure signal cannot be received
Cause
• The line condition is poor, and the proce-
dure signal from the other party cannot be
received correctly.
• The line condition is poor, and the other
party cannot receive the signal.
• The machine malfunctioned because of an
echo.
continuously while image signals are
received
Remedy
• Ask the operator of the other party to in-
crease the transmission level
image signal may be received correctly.
• Ask the operator of the other party to de-
crease the transmission start speed.
• Adjust the NL equalizer
age signal may be received correctly.
for 6 sec while in wait
Remedy
• Ask the operator of the other party to in-
crease the transmission level
procedure signal may be received correctly.
• Adjust the NL equalizer
cedure signal may be received correctly.
• Increase the transmission level
other party may receive the signal correctly.
• Adjust the NL equalizer
party may receive the signal correctly.
• Provide echo remedy 2
• Decrease the transmission level
an echo of transmitted signal will not be
received.
2-15
Chapter 2: Service Error Codes
*1
so that the
*2
so that the im-
*1
so that the
*2
so that the pro-
*1 so that the
*2
so that the other
*7
.
*1
so that