Canon G3 Error Code List page 260

Chapter 2: Service Error Codes
##1398 [ TX ] Received RDGR is faulty
Cause
• RDGR was received, but the nature of the
signal is faulty.
##1412 [ TX ] RDGR was received in the document
Cause
• A fault occurred in the document proce-
dure for layer 5 (session layer) on the re-
ceiving machine.
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
procedure for layer 5
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
2-200