Canon G3 Error Code List page 56

#997 [ TX/RX ] Power was cut during a communication
Cause
• The power went out or was turned off dur-
ing a communication.
• The power supply is faulty.
#998 [ RX ] Memory reception has ended
Cause
• This code is used to indicate the result of
memory reception on the activity report.
Chapter1: User Error Codes
Remedy
• Correct it by referring to the Service
Manual of the model in question.
• Replace the power supply unit.
Remedy
• The result is good, and requires no rem-
edy.
1-43