Canon G3 Error Code List page 188

Chapter 2: Service Error Codes
##792 [ RX ] In ECM reception, PPS-NULL between
Cause
• The line condition is poor, and PPS-NULL
cannot be received.
##793 [ RX ] In ECM reception, no effective frame was
Cause
• The line condition is poor, and the other
party cannot receive CFR correctly.
• The line condition is poor, and the image
signal cannot be received correctly.
• An echo of CFR prevents reception of the
training signal.
partial pages cannot be detected
Remedy
• Ask the operator of the other party to in-
crease the transmission level
NULL may be received correctly.
• Adjust the NL equalizer
NULL may be received correctly.
detected while signals were received at high
speed, and a time-over condition occurred
Remedy
• Increase the transmission level
other party may receive CFR correctly.
• Adjust the NL equalizer
party may receive CFR correctly.
• Ask the operator of the other party to in-
crease the transmission level
image signal may be received correctly.
• Ask the operator of the other party to de-
crease the transmission start speed.
• Provide echo remedy 3
• Decrease the transmission level
of the transmitted CFR will not be received.
2-128
*1
so that PPS-
*2
so that PPS-
*1
so that the
*2
so that the other
*1 so that the
*7
.
*1
so that an echo