Canon G3 Error Code List page 65

##009 [ TX/RX ] The end of the tonal signal from the other
Cause
• The line suffered large noise.
##010 [ RX ] In G2 or MF1 mode reception, phase
Cause
• The line condition is poor, and the phase
signal cannot be received correctly.
party cannot be detected
Remedy
• Contact the telephone company, and ask
for maintenance of the line.
synchronization cannot be made for the
1st page
Remedy
• Ask the operator of the other party to in-
crease the transmission level
phase signal may be received correctly.
• Adjust the NL equalizer
signal may be received correctly.
2-5
Chapter 2: Service Error Codes
*1
so that the
*2
so that the phase