Canon G3 Error Code List page 139

##506 [ RX ] In G1 reception, phase synchronization
Cause
• The line condition is poor, and the phase
signal cannot be received correctly.
##507 [ TX ] In G1 transmission, CFR1 cannot be
Cause
• The line condition is poor, and the other
party cannot receive the signal correctly.
• The other party malfunctioned because of
an error.
fails
Remedy
• Ask the operator of the other party to in-
crease the transmission level
phase signal may be received correctly.
• Adjust the NL equalizer
signal may be received correctly.
received
Remedy
• Increase the transmission level
other party may receive the signal correctly.
• Provide echo remedy 1
• Using a manual call, press the Start button
after hearing the 1st DIS from the other
party.
• To prevent response to the 1st DIS from
the other party, put a relatively long pause
to the telephone number when registering
an auto-dialing number.
• Ask the operator of the other party to de-
crease the transmission level
other party will not receive an echo.
2-79
Chapter 2: Service Error Codes
*1
so that the
*2
so that the phase
*1
so that the
*7
.
*1
so that the